藍屏代碼0x0000007F解決方法
又一位朋友遇到了win7旗艦版藍屏的故障，故障代碼0x0000007F，那么這樣的代碼，是什么原因引起的呢?下面學習啦小編就為大家介紹一下吧，歡迎大家參考和學習。
具體的故障現象及解決方法如下：
1.第一種情況，是因為電腦主板的問題，很多時候，主板的不兼容就會導致這樣的情況出現，而主板不兼容的情況是比較常見的，大家不妨檢查一下自己的電腦主板。
2.除了硬件之外，還有一個就是win7旗艦版中的軟件的問題了，大家可以試著將最近下載的服務或者是程序全部卸載掉，軟件的不兼容也會造成win7旗艦版出現藍屏的現象。
3.如果上述操作方式都無法解決問題的話，小編就建議各位將win7旗艦版中計算機提供的所有系統診斷軟件都用上，特別需要做一個內存檢查，非常的重要。
Windows7使用過程中，經常會遇到藍屏的現象。對于初學者來講，好象就是一場電腦災難一樣，不知所措。其實只要了解其原因之后，對癥下藥即可。針對0x0000003B藍屏故障，微軟在最近發布了解決此問題的補丁
微軟近日表示，在Windows 7或Windows Server 2008 R2中運行部分應用程序可能會導致藍屏死機(BSOD)，在這種崩潰情況下，系統會給出0x0000003B停止錯誤提示。當前，微軟已經發布了一個熱修復補丁，遭遇此類問題的用戶可以手動獲取該補丁。
微軟在知識庫文章KB2584454中詳細描述了這個問題，當你在Windows 7、Windows 7 SP1或是Windows Server 2008 R2、Windows Server 2008 R2 SP1上運行特定的應用程序時，例如Cyberlink YouCam，可能會收到下面的停止錯誤信息：
Stop 0x0000003B (c0000094 fffff8800ff22e54 fffff880098897f0 0)
YSTEM_SERVICE_EXCEPTION
導致這一問題的原因是，D3D9運行時(runtime)沒有對應用程序(如YouCam)傳送的矩形值執行參數驗證，因此，Dxgkrnl.sys模塊收到的是無效的矩形坐標。然而，Dxgkrnl.sys模塊也不會對矩形坐標進行驗證，從而導致了"被零除"異常。
修復補丁下載http://support.microsoft.com/hotfix/KBHotfix.aspxkbnum=2584454&kbln=zh-cn
問題反映：win7電腦在瀏覽網頁時候出現藍屏，使用的瀏覽器是IE 11，win7藍屏代碼008e，附上藍屏日志信息,請幫助解決。
藍屏日志如下：
復制代碼代碼如下:
Microsoft (R) Windows Debugger Version 6.11.0001.404 X86
Copyright (c) Microsoft Corporation. All rights reserved.
Loading Dump File [C:\Documents and Settings\Administrator\桌面1614-18203-01.dmp]
Mini Kernel Dump File: Only registers and stack trace are available
Symbol search path is: *** Invalid ***
*********************************************************************
* Symbol loading may be unreliable without a symbol search path. *
* Use .symfix to have the debugger choose a symbol path. *
* After setting your symbol path, use .reload to refresh symbol locations. *
*************************************************************
Executable search path is:
*********************************************************************
* Symbols can not be loaded because symbol path is not initialized. *
* *
* The Symbol Path can be set by: *
* using the _NT_SYMBOL_PATH environment variable. *
* using the -y argument when starting the debugger. *
* using .sympath and .sympath+ *
*********************************************************************
Unable to load image ntoskrnl.exe, Win32 error 0n2
*** WARNING: Unable to verify timestamp for ntoskrnl.exe
*** ERROR: Module load completed but symbols could not be loaded for ntoskrnl.exe
Windows 7 Kernel Version 7601 (Service Pack 1) MP (2 procs) Free x86 compatible
Product: WinNt, suite: TerminalServer SingleUserTS
Machine Name:
Kernel base = 0x83e15000 PsLoadedModuleList = 0x83f5e5b0
Debug session time: Wed Jul 16 02:24:00.417 2014 (GMT+8)
System Uptime: 0 days 4:08:35.290
*****************************************************************
* Symbols can not be loaded because symbol path is not initialized. *
* *
* The Symbol Path can be set by: *
* using the _NT_SYMBOL_PATH environment variable. *
* using the -y argument when starting the debugger. *
* using .sympath and .sympath+ *
*********************************************************************
Unable to load image ntoskrnl.exe, Win32 error 0n2
*** WARNING: Unable to verify timestamp for ntoskrnl.exe
*** ERROR: Module load completed but symbols could not be loaded for ntoskrnl.exe
Loading Kernel Symbols
...............................................................
................................................................
................
Loading User Symbols
Loading unloaded module list
............
Unable to load image fltmgr.sys, Win32 error 0n2
*** WARNING: Unable to verify timestamp for fltmgr.sys
*** ERROR: Module load completed but symbols could not be loaded for fltmgr.sys
************************************************* Bugcheck Analysis *** Use !analyze -v to get detailed debugging information.
BugCheck 1000008E, {c0000005, 89bca885, 9edd2714, 0}
*** WARNING: Unable to verify timestamp for qutmdrv.sys
*** ERROR: Module load completed but symbols could not be loaded for qutmdrv.sys
*** WARNING: Unable to verify timestamp for QQProtect.sys
*** ERROR: Module load completed but symbols could not be loaded for QQProtect.sys
***** Kernel symbols are WRONG. Please fix symbols to do analysis.
*****************************************************************
*** ***
*** ***
*** Your debugger is not using the correct symbols ***
*** ***
*** In order for this command to work properly, your symbol path ***
*** must point to .pdb files that have full type information. ***
*** ***
*** Certain .pdb files (such as the public OS symbols) do not ***
*** contain the required information. Contact the group that ***
*** provided you with these symbols if you need this command to ***
*** work. ***
*** ***
*** Type referenced: nt!_KPRCB ***
*** ***
******************************************************************
*** Your debugger is not using the correct symbols ***
*** ***
*** In order for this command to work properly, your symbol path ***
*** must point to .pdb files that have full type information. ***
*** ***
*** Certain .pdb files (such as the public OS symbols) do not ***
*** contain the required information. Contact the group that ***
*** provided you with these symbols if you need this command to ***
*** work. ***
*** ***
*** Type referenced: nt!_KPRCB ***
*** ***
*************************************************************************
*************************************************************************
*** ***
*** ***
*** Your debugger is not using the correct symbols ***
*** ***
*** In order for this command to work properly, your symbol path ***
*** must point to .pdb files that have full type information. ***
*** ***
*** Certain .pdb files (such as the public OS symbols) do not ***
*** contain the required information. Contact the group that ***
*** provided you with these symbols if you need this command to ***
*** work. ***
*** ***
*** Type referenced: nt!_KPRCB ***
*** ***
*************************************************************************
*********************************************************************
* Symbols can not be loaded because symbol path is not initialized. *
* *
* The Symbol Path can be set by: *
* using the _NT_SYMBOL_PATH environment variable. *
* using the -y argument when starting the debugger. *
* using .sympath and .sympath+ *
*********************************************************************
*********************************************************************
* Symbols can not be loaded because symbol path is not initialized. *
* *
* The Symbol Path can be set by: *
* using the _NT_SYMBOL_PATH environment variable. *
* using the -y argument when starting the debugger. *
* using .sympath and .sympath+ *
*********************************************************************
Probably caused by : qutmdrv.sys ( qutmdrv+cd12 )
Followup: MachineOwner
---------
【編輯分析及建議】經過查看文件，了解到qutmdrv.sys引起的。qutmdrv.sys似乎是360的驅動，建議您卸載掉再查看問題是否存在。
藍屏代碼0x0000007F解決方法
