加載用英語怎么說

加載用英語怎么說

　　加載字面意思是增加裝載量。現多用于計算機相關領域，表示啟動程序時文件或信息的載入。那么你知道加載用英語怎么說嗎?下面來學習一下吧。

　　加載英語說法1：

　　load

　　加載英語說法2：

　　load-on

　　加載的相關短語：

　　斜坡加載 Ramp Load ; Ramped Loading

　　正在加載 loading

　　加載函數 Loading function ; load function

　　塑性加載 Plastic loading

　　加載選項 Load Options

　　加載電纜 Loading Cable

　　預先加載 preload ; pre-loaded ; eager loading

　　均勻加載 uniform loading ; continuous load ; load continuously

　　加載平衡 load balance

　　加載的英語例句：

　　1. Sometimes charged cursor programs forget to change the appearance of the cursor.

　　有時使用加載光標的程序忘記改變光標的外觀.

　　2. The middle core was loaded.

　　中間那塊巖芯曾加載.

　　3. The head load time is: 35 ms.

　　磁頭加載時間: 35毫秒.

　　4. A charged cursor also demands good cancel idioms. Otherwise, how do you harmlessly discharge the cursor?

　　加載的光標也要有合適的取消操作習慣用法, 否則你如何安全地取消光標的加載狀態 呢 ?

　　5. There are two basic variants of palette tool behavior: modal tools and charged cursor tools.

　　它們的行為有兩種基本類型,即模態工具和加載的光標工具.

　　6. A replica technique is used to record the scratch patterns before and after loading.

　　可采用一種復制技術把在加載前后的劃痕圖案記錄下來.

　　7. The simplest imposed conditions are those in which the loading is periodically and uniformly repeated.

　　最簡單的加載情況是周期地、均勻而重復地施加的載荷.

　　8. The unloading curve normally falls below the loading curve to form a hysteresis loop.

　　卸載曲線通常都落在加載曲線之下,形成一個滯后回線.

　　9. In many open - loop machines, there is single - valued relationship between loading rate and stiffness during dynamic testing.

　　許多開路機器在動態試驗時,加載速度和剛度之間只有單值關系.

　　10. Loading was achieved through a battery of hydraulic jacks acting on a rigid metallic distribution plate.

　　通過作用于剛性金屬墊板上的一組液壓千斤頂加載.

　　11. The elements of the load vector, { P } , are the load components tabulated in numerical sequence.

　　加載向量P的元素是按編號順序列表的加載分量.

　　12. Appreciable differences may occur, however, when small deformations considerably alter the loading conditions.

　　當微量變形能使加載條件發生頗大改變時,就會產生頗大的差異.

　　13. If the structure is elastic the force - displacement curve follows the same path on loading and unloading.

　　如果該結構為彈性者,那么在加載和卸載時力位移曲線遵循相同的跡線.

　　14. High - strength bolts were inserted into the holes and tightened to a high preload level.

　　把高強度螺栓插入孔洞,同時擰緊螺栓達到高的預加載水平.

　　15. Key removable in locked position only. Spring loaded clip - in pawl.

　　只能在鎖住位置時取出鑰匙, 彈簧加載的嵌入式掣子.